Derbi x-race UK

[Creamsodauk]

I got lucky! The frame seems untouched with no marks, dents or paint flake

The license plate on the tail tidy is actually an inch smaller in both directions then the uk legal size!

I haven't done much work as I got myself a new toy




I have also done a little work on the gilera runner 172cc project



Il upload a few pics of the derbi as it stands! I have found some forks so next pay day I shall grab them

[Creamsodauk]

A few shots of the derbi

[odemgeezz]

Get a rear light with intergrated turning signals.

[okjes]

Am I wrong or is your frontsuspension bent?

[derbi-ftw]

Am I wrong or is your frontsuspension bent?

No, just looks like it is

[okjes]

Looks cool though..

[Creamsodauk]

The forks are bent yes

Next months pay should see them replaced

[noudi93]

did you finally find replacement forks then?

After the forks it should be almost done right?

[Creamsodauk]

found a guy with some identical too mine on Facebook so hopefully he will still have them at the end of this month

after that its just brake fluid and chain/sprockets

[spijk860]

if this guy doesn't have them you can buy one in The Netherlands and let someone pick them up for you and sent them to the UK.

[derbi-ftw]

That frontfork looks cancer beun.

Say what? You **** piece of shit.
No-namer.

Go click on the red cross in the corner.

[ramonl]

That frontfork looks cancer beun.

WOW what a fail

[Creamsodauk]

Forks are on the way! Should arrive by the weekend

Iv also cleaned up the old sprockets as they are in good condition and ordered a new chain!!

Quick question about jetting

Can anyone give me a ball park figure for what main jet would be needed on the standard 17mm carb with a sport pipe fully derestricted? I also have an open air filter fitted and currently the main jet is 96 which works a treat on the spot but as I have no forks I can't test ride it.

Anyone care to shed what jet size they run on the stock 17mm

[Koen]

Forks are on the way! Should arrive by the weekend

Iv also cleaned up the old sprockets as they are in good condition and ordered a new chain!!

Quick question about jetting

Can anyone give me a ball park figure for what main jet would be needed on the standard 17mm carb with a sport pipe fully derestricted? I also have an open air filter fitted and currently the main jet is 96 which works a treat on the spot but as I have no forks I can't test ride it.

Anyone care to shed what jet size they run on the stock 17mm

With an openairfilter and a sport pipe i would recommend around the 100/110.
I have with a gianelli conti and an openairfilter. Mainjet; 108. Topspeed around the 100km/h.

[Creamsodauk]

Forks!! Got a short video of it running that il upload

Currently jetted to a 96 I think but I have to bleed the front brake before I try and build up speed

[Creamsodauk]

[Creamsodauk]

http://youtu.be/ewnTg9KMTBU

[noudi93]

looking good and running well

I guess that now you've got that husqvarna you aren't going to upgrade this derbi? So what will happen to the derbi now then?

[Creamsodauk]

Well I bled the front brake today but can't figure out how the indicator and headlight fit haha baffled by the rubber mounts etc! Anyone got a side on pic so I can figure it out and test ride her?